You have no items in your shopping cart.
| Product Name | P/N: | Availability | Price | Qty |
|---|---|---|---|---|
| 2Post Shelf, Solid, Flanges Down, 29" | 3USHL-022FULL-29DS |
In stock
|
$74.99
|
|
| 2Post Shelf, Vented, Flanges Down, 29" | 3USHL-022FULL-29DV |
In stock
|
$74.99
|
|
| 2Post Shelf, Solid, Flanges Up, 29" | 3USHL-022FULL-29US |
In stock
|
$74.99
|
|
| 2Post Shelf, Vented, Flanges Up, 29" | 3USHL-022FULL-29UV |
In stock
|
$74.99
|
You may also be interested in the following product(s)
| Product Name | P/N: | Availability | Price | Qty |
|---|---|---|---|---|
| Transport Strap | 1USHL-STRAP |
In stock
|
$5.99
|
|
| Heavy Duty Transport Strap | 1USHL-STRAP-HVY |
In stock
|
$7.99
|
|
| Thin Anti Slip Mat | 1USHL-MAT-THIN |
In stock
|
$2.99
|
|
| Thick Anti Slip Mat | 1USHL-MAT-THICK |
In stock
|
$2.99
|
Features
The 2Post rack shelf is compatible with most 19" EIA standard 2Post rack. This 2Post rack shelf has a 300 lb (136 kgs) equipment capacity and will support a wide variety of electronic equipment. Electronic devices up to 29" (736 mm) deep can be supported on a 2Post rack shelf. Transport and seismic options are available for the 2Post rack shelf if the installation requires.
2 Post Rack Shelf - 29" - Technical Specifications
| Rack Type | EIA 19" standard 2Post racks |
| Rack Type | 2Post |
| Rack Units | 3U |
| Weight Capacity | 300 lbs (136 kgs) |
| Equipment Depth | Supports equipment up to 29" (736 mm). The equipment can be deeper than the rack mount shelf as long as the equipment is installed on the opposite side of the flanges. The flanges increase load capacity and prevent equipment movement. |
| Mounting Depth Range | Compatible with 2Post racks with 3" (76.2 mm) side posts |
| Overall Installation Depth | 29" (736.6 mm) |
| Shelf Surface Area | 17.7" x 29" (450 mm x 736.6 mm) |
| Shelf Type | Vented |
| Finish | Black textured powder coat |
| Included Hardware | 10-32 & 12-24 pan head screws |
| Hole Type | 10-32 or 12-24 threaded holes Square hole relay racks will require cage nuts |
| Assembly Notes | Phillips head screwdriver required |
| Tech Notes | Shelf depth is measured from front to rear including flanges |
