58U Open Frame Rack

The 58U Open Frame Rack is available by phone. Please call 1-888-903-7225 to order.
These server racks meet all EIA standards. The 28.875" server rack depth is compatible with all the major OEM's such as Dell, HP, IBM and Cisco. The server racks are available in heights from 24U to 58U. Compatible with overhead cable trays from B-Line and other manufacturers. Read more about Open Frame Racks.

RackSolutions® is proud to be a leading provider of server racks and equipment for SoftLayer®.
See video of RackSolutions' racks being installed in one of SoftLayer's data centers.
See one of SoftLayer's largest data centers featured on its youtube channel.

Close out the top of this rack with one of four Rack Top options. Choose from black or galvanized Rack Tops with or without cable pass-throughs. Hardware included.

These tool-less, non-locking, Side Panels come in 24U, 30U, 36U, 44U, 50U, 55U & 58U sizes. Each side panel is broken into 2 or 3 sections (depending on U height) to make installation easy. 58U, 55U, 50U and 44U rack panels are broken into 3 sections per side. 36U, 30U and 24U rack panels are broken into 2 sections per side. You must order 2 side panels per rack if you wish to install side panels on the left and right side of the rack. Open Frame Rack-111 side panels are easy to install.

Vertical Cable Organizer (P/N: 137-2412) is sold separately. There are eight (8) locations to mount this vertical organizer (front/rear, right/left, and inside/outside). The organizer supports up to four (4) power strips. Holes included for cable pass-thru. Multiple wire tie points. Management bar is shared with adjacent racks. Every rack is designed to be coupled to one-another (same height rack). Coupling hardware is included. See an example of vertical cable organizers in use.

P/N: PSV-F24-15A-S (24 Outlet)

P/N: PSV-F16-15A-R (16 Outlet)

P/N: PSV-F8-15A-Q (8 Outlet)

1 Baying Kit is required to join 2 of these racks together. 2 Baying Kits will join 3 racks together and so forth.

Don't tear up your fingers. A Cage Nut Tool may be used to install or uninstall those pesky cage nuts. This tool features 3 holes (10-32, 12-24 and M6) that are sized and labeled for you to easily check to see what screws you have. It also comes with a "U" space size reference guide on the back.

Here’s a great example of three, open frame racks bayed together in a server room.

Note: Above is an example of two, 50U, Open Frame Server Racks bayed together with two, 55U Server Racks in a data center.

“RackSolutions’ quick turnaround time on racks and custom components has helped to support SoftLayer’s exponential growth at multiple domestic and international sites.” - Joshua Rushe, V.P. of Operations at SoftLayer.