Dell PowerEdge 1650, 1750 Server - Rack Mount Adapters - 4 Post Racks |
|
|
|
|
Same Day Shipping by 3:00pm CST (Mon-Fri)
|
 |
 |
Dell PowerEdge 1650, 1750 Server - Rack Mount Adapter Kit |
| Part Number | Description | In Stock | Price | Online Purchase |
| 1UKIT-106 | Rack Mount Adapter Kit for Dell PE1750, PE1650 Servers |
 |
$109 |
| Dell PowerEdge 1650, 1750 Server - Rack Mount Adapter Kit Contents |
| Item | Qty | Description |
| Instructions | 1 | Rack Installation Instructions |
| Adapter Brackets, (see below) | 10 | Converts round holes to square holes, and adjusts the rack depth |
| Screws, 12-24,10-32 | 12 | Attach the Brackets to the rack |
| Nuts, 12-24 | 8 | Attach the Brackets to the rack |
| Cage Nuts, 12-24 | 4 | Used to double stack the Brackets if necessary |
| Dell PowerEdge 1650, 1750 Server - Rack Mount Adapters Brackets (2 each per kit) |
|
|
| Dell PowerEdge Compatibility |
| Server Compatibility |
Dell PowerEdge 1750,
Dell PowerEdge 1650 with standard
Dell RapidRail Slides Dell 1U KMM Tray (310-4227) with Dell RapidRail Slides |
| Rack Type | 4post Cabinets (Chatsworth MegaFrame, Great Plains, Shark, and most other
racks), Double 2Post Frame (Homaco, APC, and others). Recommended Double Relay Rack spacing. |
| Rack Mounting Holes | Round holes or 12-24 Threaded holes |
| Rack Upright Depth | 22.7" to 29.6" (measured from front to back of the rack's mounting surface) |
| Notes | 1. This kit works with Dell's Rack Mount slides. 2. This kit can extend or reduce the mounting depth of 4post square hole racks. 3. This kit is not designed for APC Netshelter, IBM, and APEX square hole racks. Please refer to our Rapid Rail modification service for these racks. |
| Rack Mount Adapters - 4 Post Racks |
|
 |
 |
Dell PowerEdge 1750, 1650 Rack Mount Adapter Kit
