IBM x345 x346 & x365 x3650 3rd Party Rail Kit - IBM xSeries Servers

IBM x345 x346 3rd Party Rail Kit - IBM xSeries ServersIBM x345 3rd Party Rail Kit - IBM xSeries Servers  Allow the IBM xSeries 345, 346 Server to mount in various non-standard racks.

IBM x345 3rd Party Rail Kit - IBM xSeries Servers  Works with 4 Post racks, 2Post racks, Double 2Post racks

IBM x345 3rd Party Rail Kit - IBM xSeries Servers  Supports various upright shapes such as "C", "Z", and "?" shapes.

IBM x345 3rd Party Rail Kit - IBM xSeries Servers  This slide rail kit replaces the IBM supplied slide rails.

IBM x345 3rd Party Rail Kit - IBM xSeries Servers  This kit also supports shallow racks without cable management.


IBM xSeries x345 x346 Server - Rack Mount Installation Guide

IBM x345 x346 3rd Party Rail Kit - Installation Manual


        Same Day Shipping by 3:00pm CST (Mon-Fri)

IBM x345 x346 & x365 3rd Party Rail Kit  - 4 Post                                                                                  345 346 365
Part Number Description In Stock Price Online Purchase
2URAIL-IBM-345 4Post Third Party Rail Kit for IBM x345
(mounting depth = 22.5" - 31")

$175
Buy Rack Mount Products
2URAIL-IBM-345-CMA 4Post Third Party Rail Kit for IBM x345 with Cable Management
(mounting depth = 22.5" - 31")

$225
Buy Rack Mount Products
2URAIL-IBM-345-EXT Extender Kit for 2URAIL-IBM-345
(mounting depth = 19" - 34.5")

$33
Buy Rack Mount Products


Conversion Kits - 2 Post

Part Number Description In Stock Price Online Purchase
2POST-2UKIT 2Post Conversion Kit for 1U & 2U Servers $129
Buy Rack Mount Products
4UKIT-003 2Post Flush Conversion for 1-7U Equipment
Works with standard 3" 2Post uprights		 $189
Buy Rack Mount Products


 Technical Info
Server Compatibility IBM xSeries 345 346 365 3650
Slides High quality ball bearing type
Cable management Supports IBM's cable management arm
Hardware Includes screws, cage-nuts, and nuts for all standard rack types (see below).

 Technical Info
Rack Mount Info RackSolutions Third Party Kit IBM Standard Kit
Front Flange to Door 1.50 in. (38mm) Minimum 2.76" (70mm) Minimum
Mounting Flange

22.5 - 31" (610 - 787mm)
19 - 34.5" (508 - 864mm) with -EXT kit

 28.27 - 30" (718 - 762mm)
Rear Flange to Door 4.25" (108mm) Max with Cable Mgmt 6.18" (157 mm) max
Flange Thickness Any 1/8" (3mm) Maximum
Rack Flange Type Standard "L" Shaped Uprights or
Non-Standard "C", "Z", and "?" Shapes		 Standard "L" Shaped Uprights
Rack Hole Types Round Unthreaded
Threaded 10-32
Threaded 12-24
Square Hole		 Round Unthreaded
Square Hole
Cable Mgmt Support Yes (Using IBM's Cable Mgmt Arm) Yes
Note 1:  Contact RackSolutions for solutions outside the listed depth range.



RackSolutions.com

(903) 453-0801