You have no items in your shopping cart.
| Product Name | P/N: | Availability | Price | Qty |
|---|---|---|---|---|
| Heavy Duty Sliding Rack Mount Shelf | 2USHL-130 |
In stock
|
$299.99
|
You may also be interested in the following product(s)
| Product Name | P/N: | Availability | Price | Qty |
|---|---|---|---|---|
| 2" Shelf Stop (pair) | SHELF-STOP-0200 |
In stock.
|
$29.99
|
|
| Heavy Duty Transport Strap | 1USHL-STRAP-HVY |
In stock.
|
$7.99
|
|
| Transport Strap | 1USHL-STRAP |
In stock.
|
$5.99
|
Features
These rack mount shelves are compatible with most 19" EIA standard server racks. These rack mount shelves have a 235 lb (107 kgs) equipment capacity and will support a wide variety of electronic equipment. Computer equipment up to 28" (394 mm) deep can be supported on a 19 inch rack mount shelf. The slide rails extend a full 29" (737 mm) on these computer shelves. Cable management is a standard feature of computer shelves providing a method to professionally route and secure the cables. Shelves have front and rear equipment stops. Straps & anti-slip mats are included for additional security.
Sliding Rack Mount Shelves - Technical Specifications
| Rack Type | 4Post |
| Rack Units | Shelf is 1U 3U is required when CMA is in use Shelves height 2.2" (1.25U) (56 mm) Equipment stops require less than 1U of additional space |
| Weight Capacity | 235 lbs (106.5 kgs) for 4Post mounting Capacity is set by rail capacity Tested to 400+ lbs (181.4 kgs) at full rail extension |
| Equipment Depth | 28" maximum (31.75 mm) |
| Mounting Depth Range | 15" - 31.75" deep (381 - 806 mm) |
| Overall Installation Depth | 30.5" (775 mm) from front thumb screw to rear cable management arm |
| Shelf Surface Area | W x D: 17.6" x 28" (447 x 711 mm) Shelf depth: 28.125" (714 mm) |
| Shelf Type | Vented |
| Cable Management | Articulated cable management arm |
| Finish | Black textured powder coat |
| Included Hardware | 10-32 & 12-24 screws Cage nuts included for square hole racks |
| Hole Type | Compatible with the industry standard 3/8" (10 mm) square hole racks Compatible with all standard round (non-threaded) holes Compatible with all standard threads including 10-32, 12-24 and metric M6 |
| Assembly Notes | Phillips head screwdriver required |
