Wall Mount Rack
1U-2U of Rackable Space
- EIA 19” Standard Rack
- 35-105 lb load capacity
- Includes 1 pair of brackets
- Rail kit is required for mounting equipment
Mounts to Wall, Desk, Table
- Mounts flush against any flat surface
- Mounts powerstrips, ups, and patch panels
- Great solution for remote sites, small office, or home office
Wall Mount Rack Features
RackSolutions Wall Mount Rack features 8 mounting locations and side brackets.
Wall Mount Rack Server Features
The Wall Mount Rack features a server cover that installs directly into the wall mount.
Our Wall Mount Rack allows you to mount your server in 1U-2U of space horizontally or vertically. 19” rack mount equipment can be mounted to a wall, under a desk, or stacked on a table. The rack supports up to 30” equipment, slide rails, cable management, and is compatible with most OEM slide rails including Dell, HP, IBM, Apple, Sun, Intel, Cisco, Juniper and 3Com.
The included cover* protects the unit while still allowing proper ventilation. Airspace openings above and below the server and louvers on each side maintain airflow and cooling. The rack features an adjustable front based on needs.**
The wall mount rack made from aluminum, and cover constructed from 18A steel, both with a black powder coat finish, ensure the safety and stability of your network equipment. All hardware is included, but extra brackets are available for purchase for additional mounting options. Compatible with round hole, threaded hole, and square hole equipment and slides.
*The cover does not secure the front or back or the rack
**The rear is not adjustable
| Made In America | Yes | BABA Compliant | No | RoHS Compliant | Yes | TAA Compliant | Yes | UL Compliant | No | ETL Compliant | No | Country of Manufacture | United States | Rack Type | Wall Mount | U Height | 1U, 2U | Rack Depth Range | 30" - 39" | Rack Hole Type | Square Hole | Weight Capacity | 30 - 100 lbs | Dell Part Number | 1URACK-110: A0021853 |
Synnex Part Number | 1URACK-110 - 4614594 2URACK-110 - 4614595 2URACK-110-REAR-BRKTS - 5015082 | Ingram Part Number | 1URACK-110 - 366075 2URACK-110 - E29992 | Finish | Black, textured powder coat |
|---|
Kit Contents:
- (1) 1U Rack Base
- (2) 1U Rear Angle Brackets
- (1) 1U Rack Cover
Wall-Mount Hardware Package:
- (8) #08 x 1.250 Pan Phil Head Screws
- (8) E-Z-Anchor
Rear Angle Hardware Package:
- (4) 8-32 x .375 Flat Phil Head Screws
- (4) 8-32 Keps Nuts
Cpver Hardware Package:
- (6) 6-32 x .250 Flat Phil Head Screws
Rack Mount Hardware Package:
- (8) 12-24 x .500 Pilot Pan Head Screws
- (8) 12-24 Cage Nuts
Kit Contents:
- (1) 2U Rack Base
- (2) 2U Rear Angle Brackets
- (1) 2U Rack Cover
Wall-Mount Hardware Package:
- (8) #08 x 1.250 Pan Phil Head Screws
- (8) E-Z-Anchor
Rear Angle Hardware Package:
- (4) 8-32 x .375 Flat Phil Head Screws
- (4) 8-32 Keps Nuts
Cpver Hardware Package:
- (6) 6-32 x .250 Flat Phil Head Screws
Rack Mount Hardware Package:
- (8) 12-24 x .500 Pilot Pan Head Screws
- (8) 12-24 Cage Nuts