2U 2Post Adjustable Center Mount Rack Shelf 20in Depth
Center Mounted 2 Post Shelf Configurable to Your Needs
- Shelf position configured along the mounting bracket
- Equipment stops easily adjusted or removed
- Vented or solid shelf options
- Rack shelves can mount upside down
Compatible With 2 Post Racks
- Weight Capacity: 150 lbs (68 kgs)
- Shelf Depth: 20" (508 mm)
- Compatible with 3" to 8" uprights
- Compatible with round, threaded, or square rack holes
See "Additional Information" for Technical Specifications.
RackSolutions' center mounted configurable 2Post rack shelves can be adjusted to fit a wide variety of mounting needs. The shelf's mounting position can be adjusted along the attachment ears using the holes along the sides of the shelf. Slots for equipment straps are also found along the side of the rack, which can be used for securing equipment to the shelf. The flanges, or equipment stops, can be adjusted along the entire length of the shelf in 1" increments, or removed altogether. This 2 post rack shelf has a shelf depth of 20 inches (508 mm) and a weight capacity of 150 lbs (68 kgs), making it perfect for mounting a large variety of electronic equipment in a 2 post rack that might not ordinarily rack mountable. Our relay rack shelves are compatible with any Standard EIA 19" 2 post relay or telecommunications rack.
The shelf can be adjusted and configured to best suit your needs.
Features at a Glance
The 20” configurable relay rack shelf is designed to fit a variety of needs. The shelf’s position can be adjusted along the center mounting brackets and comes with equipment stops that can easily be moved or removed altogether.
|Dell Part Number||2USHL-020FULL-20V - A8169465|
|Assembly Notes||Phillips head screwdriver required|
|Equipment Depth||The equipment can be deeper than the rack mount shelf as long as the equipment is installed on the opposite side of the flanges. The flanges are used to increase the load bearing capacity of the rack mount shelf or used to prevent equipment movement.|
|Shelf Type||Solid , Vented|
|Rack Type||2 Post|
|Shelf Surface Area||20" x 17.375" (508 mm x 441 mm)|
|Finish||Black, textured powder coat|
|Mounting Depth Range||These relay rack shelves are cantilever mounted and will install into any relay rack as well as any 4Post server rack|
|Included Hardware||10-32 & 12-24 pan head screws|
|Weight Capacity||150 lbs (68 kgs)|
|Overall Installation Depth||20" (508 mm)|
|Material||16 GA Steel|
|Amazon ASIN||2USHL-020FULL-20V = B0006I5H72 2USHL-020FULL-20S = B0006I5GJQ|
|Tech Notes||The relay rack shelf can be installed in a 4Post server rack
Shelf depth is measured from front to rear excluding flanges