The Dell PE2950 slide rail kit replaces the original Dell rails. This rail kit resolves some of the common issues associated with the Dell rail kit such as obstructions with the frame of the rack and installation depth range problems. This rail kit reduces the overall installation depth from 36" (914 mm) down to 31.5" (800 mm). The PE2950 rail kit comes with complete cable management. The cable management arm reduces the installation depth required by the PE2950 by a full 3.5" (89 mm).
- Additional Information
Compatibility Dell PowerEdge R340, R440, R640 Slide Rails Dell Part Number A6289666 Rail OEM Dell Fixed/Sliding Sliding Tool-less/Standard Standard Included Hardware 10-32 and 12-24 screws
Alignment plates are provided for square hole racks
Cable Management Articulated cable management arm included Assembly Notes Phillips head screwdriver required Overall Installation Depth 31.5" (800 mm) or 32.8" (833 mm)
The physical installation depth is dependent on which brackets are used on the cable management arm
Rail Type Ball bearing
28" travel (711 mm)
Mounting Depth Range 18 - 30" (457 - 762 mm) Tech Notes This kit replaces the Dell rail kit (36" physical depth) with the RackSolutions kit (31.5" physical depth) Threaded front flange mates with the Dell thumb screws (10-32 threads).
This rail kit replaces the Dell rail kit in circumstances where the Dell rail kit is incompatible with the rack
Rack Units 2U Rack Type 2 Post , 4 Post Amazon ASIN B00UVK98GG RoHS Compliant Yes Hole Type Compatible with the industry standard 3/8" square hole racks
Cage nuts included for square hole mounting
Compatible with all standard round (non-threaded) holes
Compatible with all standard threads including 10-32, 12-24 and metric M6
TAA Compliant Yes