You have no items in your shopping cart.
|Dell PowerEdge 2650 Slide Rails||2URAIL-2650||
You may also be interested in the following product(s)
|2 Post, Center Mount Conversion, 2U-7U||
This kit replaces the Dell rail kit (36" physical depth) with the RackSolutions kit (31.5" physical depth)
The PE2650 slide rail kit is an alternative to the Dell rail kits. This slide rail kit provides two advantages over the Dell rail kit. This rail kit has a much broader installation depth range than the Dell rail kit. This rail kit also reduces the overall installation depth from 36" to 31.5" (914.4 mm to 800 mm). If the original Dell rails have been lost, damaged, or are no longer available, this rail kit is the solution for installing your Dell PE2650. This kit comes with complete cable management.
Dell PowerEdge 2650 Slide Rails - Technical Specifications
|Server Compatibility||Dell PowerEdge 2650|
|Rack Type||4Post 19" EIA-310 standard server rack
Meets EIA-310 requirements. Use reducer brackets for 23" and 24" racks.
|Hole Type||Compatible with the industry standard 3/8" (10 mm) square hole racks
Compatible with all standard threads including 10-32, 12-24, and Metric M6
Compatible with all standard round (non-threaded) holes
|Rail Type||28" ball bearing slide rails|
|Mounting Depth Range||18" to 30" (457 - 762 mm)|
|Overall Installation Depth||31.5" or 32.8" This is the physical depth of the installation depending on which cable management brackets are used.|
|Cable Management||Articulated cable management arm|
|Included Hardware||8-32 pan head screws
8-32 truss head screws
8-32 Keps nuts
|Tech Notes||Threaded front flange mates with the Dell thumb screws (10-32 threads)
This rail kit should be used in installations where the Dell rail kit is not compatible with the server rack or the Dell rail kit is unavailable.
If Dell PE2850 or PE2650 rail kits are used, then purchase 2Post Center Mount Brackets, 2POST-2UKIT