The PE2850 slide rail kit is an alternative to the Dell rail kits. This slide rail kit provides two advantages over the Dell rail kit. This rail kit has a much broader installation depth range than the Dell rail kit. This rail kit also reduces the overall installation depth from 36" down to 31.5" (914.4 mm to 800 mm). If the original Dell rails have been lost, damaged, or are no longer available, then this rail kit provides the solution to installing your Dell PE2850. The PE2850 rail kit comes with complete cable management. The cable management arm reduces the installation depth required by the PE2850 by a full 3.5" (89 mm).
- Additional Information
Compatibility Dell PE2850 Rail OEM Dell Fixed/Sliding Sliding Tool-less/Standard Standard Included Hardware 8-32 truss head screws
8-32 keps nuts
Cable Management Articulated cable management arm Assembly Notes Philips head screwdriver required Overall Installation Depth 31.5" (800 mm)
32.8" (833 mm) with alternate CMA configuration
Rail Type Ball bearing slide rails
28" extension (711 mm)
Mounting Depth Range Mounting depth range: 18" - 30" (457.2 - 762 mm) Tech Notes This rail kit should be used in installations where the Dell rail kit is not compatible
with the server rack or the Dell rail kit is unavailable.
Threaded front flange mates with the Dell thumb screws (10-32 threads)
If Dell PE2850 or PE2650 rail kits are used, then purchase 2POST-2UKIT
Rack Units 2U Rack Type 4 Post Amazon ASIN B00CZ0IJ2E RoHS Compliant Yes Hole Type Compatible with the industry standard 3/8" (10 mm) square hole racks
Compatible with all standard round (non-threaded) holes
Compatible with all standard threads including 10-32, 12-24 and metric M6
TAA Compliant Yes