20A Horizontal Rackmount Power Strip
As low as
$69.99
In stock
Supplies power to rack mounted equipment
- NEMA L5-20 plug and 5-20 receptacles
- 20A, 125VAC circuit breaker
- 6 outlets
- CSA certified and UL recognized
- Not surge protected
Click here for surge protected options.
Fits 2Post and 4Post racks
- Compatible with any standard EIA 19" rack
- Works with square, round or threaded hole racks
Learn more about receptacle & plug types (opens in a new tab).
The rackmount power strips are able to provide power from either the front or the rear of the unit depending on which model is used. The power strip has a lit ON/OFF switch to indicate power and a 20A circuit breaker to prevent over current situations. The Rack Mount Power Strip is CSA certified and UL recognized. Power strips are used to supply power to rack mounted equipment such as servers, switches, and routers.
BABA Compliant | No |
---|---|
RoHS Compliant | Yes |
TAA Compliant | No |
UL Compliant | Yes |
ETL Compliant | No |
Country of Manufacture | China |
Cord Length | 15 foot |
Surge Protection | Yes |
Powerstrip Certification | CSA certified, UL recognized under the component program of UL Standards C22.2 (No. 21-95, 42-99) Standards UL (UL1363) |
Surge Suppression | No |
Receptacles & Plugs | NEMA L5-20P, NEMA 5-20R |
Number of Outlets | 6 Outlets |
Powerstrip Orientation | Horizontal |
Amperage | 20A |
Tech Notes | The 20A power strips have a twist lock plug The receptacles are straight blade Rack units = 1U |
Synnex Part Number | PS19-F6-15-20A-N - 4658298 |
Ingram Part Number | PS19-R6-15-20A-P - 6NP044 |
Assembly Notes | Fully Assembled |
Write Your Own Review
We found other products you might like!