2U Joggled Reducer Brackets 2-Pack
Allows 19" equipment to fit 23 - 24" racks
- Does not change mounting depth of rack
- "Joggled" bracket type keeps mounting flush with the frame
- Capacity, 50 lbs (22.7 kgs) per rack unit
- P/N: 2UBRK-23J-PAIR reduces width of 23" rack to 19"
- P/N: 2UBRK-24J-PAIR reduces width of 24" rack to 19"
- Single order comes with 2 brackets
Fits any 4Post, 2Post rack
- Compatible with Square, round holes
- Works with Dell, HP, IBM, equipment
NOTE: Hardware not included. Rackmount hardware can be purchased here.
RackSolutions' reducer brackets allow rack-mount equipment designed for 19" (483 mm) racks to be properly installed into 24" (609 mm) and 23" (584 mm) racks.
The 24" (609 mm) and 23" - 19" (584 mm - 483 mm) reducer bracket provides EIA-D standard square holes for installing OEM rails into 24" (609 mm) and 23" (584 mm) round-holed racks.
This "joggled" type bracket has a slight bend in the material that keeps whatever you are mounting flush with the server frame, unlike flat brackets which cause items to stick out slightly.
The RackSolutions Reducer bracket allows 19" equipment to be mounted in 23" or 24" racks
Why 19" Conversion
19" server rack is the standard. Most OEMs made equipment that mounts in 19" racks. Some 2 post racks can be 23" or 24" wide and our brackets will allow for 19" equipment to be mounted normally.
|Dell Part Number||2UBRK-23J-PAIR - A1292710
2UBRK-24J-PAIR - A1309660
For a full list of Dell SKUs setup in the Dell ordering system visit our Dell SKU page.
|Synnex Part Number||2UBRK-24J-PAIR - 4614656 2UBRK-23J-PAIR - 4614655|
|Ingram Part Number||2UBRK-24J-PAIR - N56015 2UBRK-23J-PAIR - N55499|
|Tech Notes||50 lb (22.7 kgs) weight capacity per rack unit|
|Hole Type||Compatible with all EIA-D standard round hole racks or square hole racks with cage nuts|
|Amazon ASIN||2UBRK-23J-PAIR = B00UVK7S2M 2UBRK-24J-PAIR = B00UVK7XHM|