2U Fixed Heavy Duty Rack Shelf
As low as $149.99
Mount 500 lb to 900 lb on a single shelf
- Supports the even the heaviest equipment
- Made from Thick 1/8" steel
- Great for equipment like printers, UPS or tower servers
- Adjustable mounting brackets
Compatible with 2 Post and 4 Post Racks
- Weight Capacity 1USHL-116: 500 lbs (226 kgs) 108-0991: 900 lbs (409 kgs)
- Shelf Depth: 28" (711 mm)
- Adjustable Mounting Depth: 15 - 31.5" (381 - 800 mm)
- Fits square, round, threaded holes
See "Additional Information" for Technical Specifications.
RackSolutions' Fixed Heavy Duty Rack Shelf is built to withstand even the heaviest equipment in a server rack. The shelf's 1/8" steel construction helps give the shelf an impressive 500 lbs (226 kgs) weight capacity and a depth of 28 inches (711 mm).
For even heavier equipment, a version with a 900 lb (226 kgs) weight capacity is available. The extra heavy-duty version of this shelf uses stronger front and rear brackets that better spread the load of the shelf.
Our heavy-duty rack shelves can be installed into racks with square, round, or threaded holes in EIA standard 2Post relay racks. They are ideal for equipment like large switches, UPSes and more.
|Dell Part Number||108-0991 - A5713398
1USHL-116 - A7258943
For a full list of Dell SKUs setup in the Dell ordering system visit our Dell SKU page.
|Synnex Part Number||1USHL-116 - 4614582 108-0991 - 5435872|
|Ingram Part Number||1USHL-116 - D34827 108-0991 - NE8991|
|Equipment Depth||28" ( 711 mm)|
|Rack Type||2 Post , 4 Post|
|Shelf Surface Area||28" x 17.58" ( 711 mm x 447 mm)|
|Finish||Black textured powder coat|
|Mounting Depth Range||15 - 31.5" (381 - 800 mm)|
|Included Hardware||10-32 & 12-24 screws. Cage nuts are included for square hole racks|
|Weight Capacity||1USHL-116: 500 lbs (226 kgs) 108-0991: 900 lbs (409 kgs)|
|Overall Installation Depth||31.5" (800 mm)|
|Amazon ASIN||1USHL-116 = B00UVK6VC0 108-0991 = B007B5PIOK|
Write Your Own Review
We found other products you might like!