Dell PE R610 - Rackmount Rail Guide
Our Rackmount Rail Guide serves to show how the Dell PE R610 can be rackmounted in both 4 post and 2 post configurations. RackSolutions offers the 1URAIL-R6-CMA as an alternative to the Dell rails for this server chassis. The rail kit mounts in both 4 post and 2 post racks.
Note: Your server may look different than the one pictured






+ 4Post round, square, threaded holes
Fixed solution: Use 1UKIT-109 as an alternative to the Dell rails
Slide rail solution: Use 1URAIL-R6-CMA as an alternative to the Dell rails
+ 2Post center mount
Fixed solution: Use 1UKIT-009. Dell rapid rails are not required
Slide rail solution: Use 1URAIL-R6-CMA will require 2Post Conversion Kit 2POST-2UKIT. Dell rails are not required
+ 2Post flush mount
Fixed solution: Use 1UKIT-009. Dell Rapid Rails are not required
2Post Flush Mount requires additional 4UKIT-003 combined with 1URAIL-R6-CMA. Dell rails are not required
Dell Part Number | 1UKIT-009 - A0389974 For a full list of Dell SKUs setup in the Dell ordering system visit our Dell SKU page. |
---|---|
RoHS Compliant | Yes |
TAA Compliant | Yes |