HP DL320 G5P, DL320S, DL160 G6 Rack Rails
As low as
$29.99
In stock
Fits any 4Post,2Post rack
- Square, round, threaded holes
- Supports L, C, and ? rack upright shapes
- HP standard rail kit not required
4Post Mounting
- 4Post Mounting: Requires the P/N: BRK-HP-4P-001
2Post Mounting
- 2Post Center Mount: Requires the P/N: BRK-HP-2PC-001
- 2Post Flush Mount: Requires the P/N: BRK-HP-2PF-001
These three rail kits allow the HP DL320 G5P to be installed into any type of server rack. These rail kits replace the HP rail kits that would normally come with the sever. The rail kits are compatible with several of the HP servers such as the DL320S, DL120 G7, and the DL160. These rail kits allow the DL320 G5P to be installed into typical 4Post server racks as well as 2Post server racks in both the center mount and flush mount configurations.
| HP Server Compatibility | DL160 G6, DL320 G5P, DL320S |
|---|---|
| Compatibility | HP DL320 G5P HP DL320S HP DL160 G6 HP DL120 G7 |
| Rail OEM | HP |
| Fixed/Sliding | Fixed |
| Tool-less/Standard | Standard |
| Included Hardware | All necessary hardware is included |
| Cable Management | Cabling crossbar is included |
| Assembly Notes | Phillips head screwdriver required |
| Rail Type | Fixed rail, non-ball bearing slides |
| Mounting Depth Range | 4Post rack dimensions: Compatible with server rack depths from 3" (76.2 mm) to 32.5" (825.5 mm) 2Post rack dimensions: Compatible with relay racks with upright dimensions of 3" (76.2 mm) |
| Tech Notes | This rail kit replaces the HP rail kit in installations where the HP rail kit is incompatible with the existing server rack
BRK-HP-2PC-001: 2Post center mount BRK-HP-2PF-001: 2Post flush mount BRK-HP-4P-001: 4Post |
| Finish | Zinc plated |
| Rack Units | 1U |
| Rack Type | 2 Post , 4 Post |
| Amazon ASIN | BRK-HP-2PC-001 = B00UVKB99K BRK-HP-2PF-001 = B00RKJ9JDI BRK-HP-4P-001 = B00UVKBE0E |
| RoHS Compliant | Yes |
| Hole Type | Compatible with the industry standard 3/8" (10 mm) square hole racks Compatible with all standard round (non-threaded) holes Compatible with all standard threads including 10-32, 12-24 and metric M6 |
| TAA Compliant | Yes |
Write Your Own Review
We found other products you might like!
