Dell PowerEdge R300: Specs and Rack Compatibility
The Dell PowerEdge R300 is a space-saving server that provides exceptional reliability, availability, and performance with single-socket Intel processors, more memory and internal storage. This 1U rack-dense server provides exceptional reliability, availability and performance. For those who need maximum energy efficiency and leading performance per watt, this rack server is ideal for small to medium business and remote offices.
PowerEdge R300 Mounting Equipment
- Slide Rail: 1U 115-F Fixed Rail for Dell
- 4 Post Racks: 19” width, 20”-30” mounting depth
- 2 Post Racks: 19” width, 3”-6” uprights
- Universal Rail: 1U Universal Rack Rails
- 2 Post Fixed Shelf: 1U 115 2Post Sliding Equipment Shelf 27in Depth
PowerEdge R300 Mounting Specifications
Chassis Dimensions:
- Length (depth): 26.22” (666.2 mm)
- Width: 17.08” (434 mm)
- Height: 1.66” (42.4 mm)
- Weight: 26.02 kg (30.42 lb) maximum weight
Mounting Requirements:
- U height: 1U
- Rack width: 17.08”
- Mountable depth: 26.22”
PowerEdge R300 Hardware Specifications
- RAM: Six ECC DDR-2 667 SDRAM DIMM sockets for up to 24GB of memory
- Storage: 2TB (2 x 1TB) SAS, 2TB (2 x 1TB) SATA
- CPU options: Quad-Core Intel Xeon Processor 5000 series, Dual and Quad-Core Intel Xeon Processor 3000 series, Intel Core 2 Duo processor, Intel Celeron processor
- Power: Single power supply (400W), Optional redundant power supplies (400W each); Uninterruptible Power Supplies: 1000W-5600W, 2700W-5600W High Efficiency Online, Extended Battery Module (EBM), Network Management Card
- Remote management: iDRAC 5, Baseboard Management Center
PowerEdge R300 Dimensions and Rack Compatibility
The PowerEdge R300 chassis is 1 rack unit in height, has a depth of 26.22 inches and will fit in standard EIA 19 inch racks.
Rails allow for the most efficient use of space when mounting servers. RackSolutions specifically designed a slide rail kit to fit the shoulder screws of the PowerEdge R300.
Universal rails that have a height of 1U and support up to 26.22 inches of depth will be compatible with the PE R300. A benefit of these is the ability to re-use them for different servers or future upgrades. Plus, it’s easy to slide your server in and out of them for maintenance. You can also use our slam latch accessory kit for your Dell servers to be secured in place when using our universal rails. The retaining plate is only compatible with 1U-2U standard width universal rails.
Other products that will be useful when mounting your server can be found here:
