- Description
-
Details
The Rack Solutions Universal Server Rack Rails come in either 1U, 2U or 3U+ sizes, with weight capacities of 45, 75 and 200 pounds, respectively. The universal rails are designed to replace OEM rails included with Apple, HP, IBM and Dell server racks, providing a flexible solution for damaged server rack rails or OEM slide rails. The product is designed to support a variety of server racks, and is compatible with setups requiring standard square, rounded and threaded holes. To further its compatibility with various different devices and server racks, the rail rack supports mounting depths between zero and 31.75 inches. The server rack rail ships with a variety of complementary items and hardware to make assembly, installation and cable management easier. Hardware items include screws, cage-nuts and nuts for all rack types. A cable management bar is also included to assist with routing, and velcro strips come included to keep cords secure. Overall, the all-purpose, zinc plated, fixed Universal Server Rack Rails can meet the needs of a variety of server installation solutions, allowing data centers to replace their OEM rails with a high-quality, reliable system.
Testimonials
"Installed those universal rails from Rack Solutions yesterday - it was so easy and worked so well that the assistant editor literally couldn't believe it. Wish I would have discovered these first (before wasting precious time and money on extenders, adapters, etc.) And I mean every word. Thanks for the great service, quick turnaround, and excellent product!" :)
Shaun O.
Adjustable Rack Rails
Square Mounting HolesAdjustable Rack Rails and Square Hole Mounting
The rail kit depth is fully adjustable from 10"-31.75" (254mm-806mm) all by loosening the screws and nuts. The rail kit is made from 18 GA steel and is zinc plated. The RackSolutions Universal rail kits are square hole to allow for the rails to be compatible with round, square or threaded hole racks.
- Additional Information
-
Additional Information
Assembly Notes Ships un-assembled Equipment Depth The rack rails support flange is 23.5" (597 mm) long. The rack rail will support servers computers or equipment up to 35" (889 mm) deep. Rack Type 4 Post Fixed/Sliding Fixed Shelf Surface Area *Maximum: 17.4" (442 mm)
1U Minimum: 16.625" (422 mm)
2U Minimum: 16.375" (416 mm)
3U Minimum: 16.75" (413 mm)*Maximum equipment width allowed is based on worst case conditions. Wider equipment may fit depending on the mounting configuration and/or actual equipment dimensions. Please contact technical support for further assistance.Finish Zinc plated Mounting Depth Range 10" - 31.75" (254 - 806 mm) Included Hardware - Components
- (1) Left fixed rail
- (1) Right fixed rail
- (2) Rear brackets
- (1) Cable crossbar
- (1) 30" Velcro cable tie
- Includes screws, cage-nuts, and nuts for all standard rack types
- Assembly hardware kit
- (8) 8-32 flat head screws
- (8) 8-32 nuts
- Cage Nuts
- (2) 10-32 cage nuts
- (2) 12-24 cage nuts
- (2) M6 cage nuts
- Rack Hardware
- (12) 10-32 pan head screws
- (12) 12-24 pan head screws
- (12) 12-24 cage nuts
- (12) 12-24 square nuts
Weight Capacity 1U: 45 lbs (20.4 kgs)
2U: 75 lbs (34 kgs)
3U: 200 lbs (90.7 kgs)Rack Units 1U, 2U or 3U Tool-less/Standard Standard Overall Installation Depth Maximum overall depth is the same as the rack's mounting depth Hole Type Compatible with the industry standard 3/8" square hole racks
Cage nuts included for square hole mounting
Compatible with all standard round (non-threaded) holes
Compatible with all standard threads including 10-32, 12-24 and metric M6RoHS Compliant Yes - Reviews
-
Adjustable Rack Rails
Square Mounting HolesYou may also be interested in the following product(s)
-
Cage Nut Tool
$14.99 -
Individual Cage Nuts & Screws
Starting at: $3.75