The MP Rack is a mac pro rack shelf constructed for server clusters, virtual systems, and render farms. It uses no tools to install which makes getting up and running simple. The mac pro rack mount shelf takes up only 1U of space and 6U with Mac Pros mounted. The open design and sliding shelf allows easy access to all peripheral ports and cable management.
The mac pro server rack shelf has a passive ventilation system designed to isolate hot and cold sides. The ventilation system takes in cold air through the front of the shelf's air intake and moves the air to a lower chamber where each Mac Pro's air intake resides. Then the Mac Pro's own cooling system then passes the hot air into the server's hot area where it is then ventilated out.
The mac pro rack can also be used for shelving other equipment if you only have a few Mac Pros to install. By covering the other openings with supplied caps, you now have additional shelf space for hard drives, routers, or whatever your needs may be.
The MP Rack comes with the pull-out shelf, two rails, and a slide-out shelf that holds up to 6 Mac Pros (post-December 2013 models). The mac pro mount also includes loose adhesive-backed cable tie-downs so you can place the tie down points wherever you require.
NOTE: This information was provided by H-Squared, LLC.
CoolingThe ventilation system takes in cold air through the front of the shelf's air intake and moves the air to a lower chamber where each Mac Pro's air intake resides. Then the Mac Pro's own cooling system then passes the hot air into the server's hot area where it is then ventilated out.
Tool-less InstallationThe MP rack can be installed in less than 5 minutes with no tools. Each rail securely engages the square hole rack posts and then the shelf is slid into place.
- Additional Information
Assembly Notes Tool-less Installation Equipment Depth 24" (69 cm) Shelf Type Vented Rack Type 4 Post Fixed/Sliding Sliding Shelf Surface Area 24" x 19" (69cm x 48.2cm) L x W Finish Black Mounting Depth Range 27.77- 29.97" (705.5mm - 761.23) Included Hardware Tool-less design requires no additional hardware Weight Capacity 252 lbs (115.2 kgs) Rack Units Mount from 1-6 Mac Pros per 6U Tool-less/Standard Tool-less Hole Type Mounts to any 19" 4 Post Rack with Square Holes Material Powder-coated Steel RoHS Compliant Yes Tech Notes Compatible with: Mac Pros (post-December 2013 models)