Dell PowerEdge R330: Specs and Rack Compatibility
The Dell PowerEdge R330 is a 1U rack server designed to deliver powerful performance and maximize operational efficiency. This server features intelligent automation, enhanced DDR4 memory, and up to 92% reduction in firmware update time. For those who need application performance and rapid response times, this rack server is ideal for small and medium businesses (SMB) and remote office/branch office (ROBO).
PowerEdge R330 Mounting Equipment
- Slide Rail: 1U Cobra 110-A Dry Slide Rail for Dell
- 4 Post Racks: 19” width, 20”-30” mounting depth
- 2 Post Racks: 19” width, 3”-6” uprights
- Universal Rail: 1U Universal Rack Rails
- 4 Post Sliding Shelf: Rack Mount Sliding Shelf
- 2 Post Fixed Shelf: Light Duty Server Rack Shelf 24″
PowerEdge R330 Mounting Specifications
Chassis Dimensions:
- Length (depth): 26.66” (677.3 mm) with redundant power supply unit
- Width: 18.99” (482.4 mm) with rack latches; 17.08” (434.0 mm) without rack latches
- Height: 1.68” (42.8 mm)
- Weight: 4-drive bay chassis – 6.0 kg (13.22 lb) empty, 13.8 kg (30.42lb) maximum configuration; 8-drive bay chassis – 6.4 kg (14.1lb) empty, 13.4 kg (29.54lb) maximum configuration
Mounting Requirements:
- U height: 1U
- Rack width: 19”
- Mountable depth: 27”
PowerEdge R330 Hardware Specifications
- RAM: Up to 2400MT/s DDR4 DIMMs (Architecture), UDIMMs (Memory type), 4 (Memory module sockets), Up to 64GB (Maximum RAM)
- Storage: Up to 4 x 3.5″ cabled HDD plus optional 2 x 1.8″ SSD cabled, Up to 4 x 3.5″ hot-swap HDD, Up to 8 x 2.5″ hot-swap HDD, Up to 4 x 2.5″ hot-swap HDD (available via hybrid drive carrier)
- CPU options: Intel Xeon processor E3-1200 v6 product family, Intel Pentium, Intel CoreTM i3, Intel Celeron
- Power: Up to 2 x 350W hot-plug redundant power supplies
- Remote management: iDRAC8 with Lifecycle Controller, iDRAC8 Express (default), iDRAC8 Enterprise (upgrade), 8GB vFlash media (upgrade), 16GB vFlash media (upgrade)
Dell PowerEdge R330 Dimensions and Rack Compatibility
The PowerEdge R330 chassis is 1 rack units in height, has a depth of 27 inches and will fit in standard EIA 19 inch racks.
Rails allow for the most efficient use of space when mounting servers. RackSolutions specifically designed a slide rail kit to fit the shoulder screws of the PowerEdge R330.
Universal rails that have a height of 1U and support up to 27 inches of depth will be compatible with the PE R330. A benefit of these is the ability to re-use them for different servers or future upgrades. Plus, it’s easy to slide your server in and out of them for maintenance. You can also use our slam latch accessory kit for your Dell servers to be secured in place when using our universal rails. The retaining plate is only compatible with 1U-2U standard width universal rails.
Other products that will be useful when mounting your server can be found here:
