15A Horizontal Rackmount Power Strip with Surge Protection
Starting at $94.99
In stock
Power all equipment in your rack
- 12,000 amp rated MOV's
- CSA certified and UL recognized
- NEMA 5-15 plugs and receptacles
- 15A, 125VAC circuit breaker
- 6 outlets
- Rack mounts horizontally
- Surge protected
Compatible with any 2Post and 4Post rack
- Fits in any standard EIA 19" rack
- Works with square, round or threaded hole racks
These Rackmount Powerstrips protect equipment with built in surge suppression. The surge suppression protects in all three AC modes: Line to Neutral, Neutral to Ground, and Line to Ground. The power strips also have a circuit breaker that protects in over current situations. This rackmount power strip is designed to distribute power from either the front or the rear of the unit and have a lit ON/OFF switch to indicate power. The horizontal power strips are perfect for providing power to rack mounted equipment such as switches and servers.
| Visbility Bypass Enabled | Yes |
|---|---|
| Cord Length | 15 foot, 6 foot |
| Powerstrip Certification | CSA certified Standards C22.2 (No. 21-95, 42-99, 8-M1986) |
| Surge Suppression | 12,000 Amp rated MOV's (Metal Oxide Varistor) Max 36,000 Amps transient current and 780 Joules 400V UL 1449 suppressed voltage rating Protection in all 3 AC modes (L-N, N-G, L-G) Green indicator light confirms surge module is active |
| Receptacles & Plugs | NEMA 5-15P, NEMA 5-15R |
| Number of Outlets | 6 Outlets |
| Powerstrip Orientation | Horizontal |
| Amperage | 15A |
| Tech Notes | The internal protection will disconnect the surge module at the end of it's useful life and extinguish the green light but will maintain unprotected power to the load |
| RoHS Compliant | Yes |
| Assembly Notes | Fully Assembled |
| TAA Compliant | No |
Write Your Own Review
We found other products you might like!
