2U Raven 105-A Rail for HPE
Fits any 4 Post rack
- Non-ball bearing, slide rails
- Square, round, threaded hole compatible
- Adjustable mounting depth
- HPE rail kit not required
- Mounting Depth Range:Â 3.0"-32.0"
Alternative to HPE DL380 Gen 8, DL560 Gen 8, Gen 9 & Gen 10 rail kit
- Mounts DL380p Gen 8 & Gen 9 in 4Post racks
- Mounts DL380p Gen 8 & Gen 9 in any 2Post Relay Rack
- Also compatible with the HPE SimpliVity 380 Gen 10
Fits any 2 Post rack
- Center mounts in 2 Post rack
- Flush mount installation requires the Conversion Bracket 4-Pack (opens in a new tab)
- Works with 3" - 6" uprights
This slide rail kit allows the HPE DL380 Gen 8 to be installed in any type of server rack. Works with DL380, Gen 8. These rails replace the HPE rail kit that would normally come with the sever. This DL380 Gen 8, Gen 9 & Gen 10 rail kit allows the server to be installed in typical 4Post server racks as well as 2Post server racks. These rails are considered a dry slide type. They allow the server to slide in and out, but they are not ball bearing slides. Also, the rails do not include a stop catch mechanism that prevents the server from sliding completely out of the rack when removing it for servicing. A flush mount kit (opens in a new tab) is required for flush mount rail installation. The conversion brackets must match the corresponding rail’s U height (e.g., 1U rail = 1U Conversion Bracket).
| Made In America | Yes | BABA Compliant | No | RoHS Compliant | Yes | TAA Compliant | Yes | UL Compliant | No | ETL Compliant | No | Weight (lbs) | 5.170000 | Country of Manufacture | United States | OEM Compatibility | HP / HPE | Generation | Gen10, Gen8, Gen9 | Product Line | ProLiant, SimpliVity | Form Factor | Server | U Height | 2U | Rack Type | 2 Post , 4 Post | Rack Hole Type | 10-32 Thread, 12-24 Thread, M6 Thread, Square Hole | Fixed/Sliding | Sliding | Weight Capacity | 30 - 100 lbs | Finish | Zinc plated | Synnex Part Number | 122-2447 - 4667638 | Ingram Part Number | 122-2447 - QV5094 |
|---|
Data Sheet
2U Raven 105-A Rail for HPE (122-2447)
Open PDF
Installation Instructions
2U Raven 105-A Rail for HPE (122-2447)
Open PDF
4 Post Mounting Dimensional Drawings
2U Raven 105-A Rail for HPE (122-2447)
Open PDF
2 Post Mounting Dimensional Drawings
2U Raven 105-A Rail for HPE (122-2447)
Open PDFKit Contents:
- (2) Outer Rail (Left & Right)
- (2) Inner Rail
- (2) Rear Bracket (Left & Right)
Rear Bracket Hardware:
- (8) 8-32 x .312 Flat Head Screw
- (8) 8-32 Keps Nut
Mounting Hardware:
- (12) 8-32 x .500 Pan Head Screw
- (2) Retainer Plate (Left & Right)
- (2) Mounting Plate
- (2) Latch Plate (Left and Right)
Rack Mount 8x:
- (8) 10-32 x .500 Pan Head Screw
- (8) 12-24 x .500 Pan Head Screw
- (8) 12-24 x Square Nut
- (8) 12-24 x Cage Nut
Rack Mount 4x:
- (4) 10-32 x .500 Pan Head Screw
- (4) 12-24 x .500 Pan Head Screw
- (4) 12-24 x Square Nut
- (4) 12-24 x Cage Nut
- DL180 G10
- DL180 G9
- DL380 G10
- DL380 G9
- DL380e G8
- DL380p G8
- DL385 G10
- DL385p G8
- DL560 G10
- DL560 G8
- DL560 G9
- DL80 G9
- SimpliVity 380 G10