4U Flush Mount Conversion Bracket 2-Pack (26in Deep) with 2U Adapter Brackets 4-Pack (2 bends, 0.59in Deep)
Flush mount a server in a 2Post rack
- Mounts 1U - 4U servers
- Provides 4U of rack mount space
- Alternative to a center mount kit
- 2 Post server rack must be supported
Fits any 19", 2Post racks
- Universal square holes
- Compatible with most slide rails
- Dell, HP, IBM compatible
- Weight Capacity: 200 lbs.
NOTE: The server chassis + rail kit can not exceed 17.72" to be compatible.
The flush mount conversion kit from RackSolutions allows servers using 4Post rails to be mounted in 2Post, Telco racks. When front space is limited, this kit provides an alternative to the common center mount kits. The flush mount kit provides 4-point corner attachments to allow most OEM rails to be used. The flush mount kit provides 4U of 4Post rack mount space in a 2Post rack.
Easy installation of the 4UKIT-003, allows 4U of space to flush mount in a 2 post rack.
Flush mount conversion kit features
The flush mount conversion kit has a bracket for mounting into the front of the rack uprights. Next, is the rear cross brace to strengthen the kit while mounting equipment flush.All mounting hardware is included.
|Finish||Black, textured, powder coat|
|Included Hardware||(2) Large, support brackets
(2) Small, support brackets
12-24 cage nuts, bolts and pan head screws
|Assembly Notes||Philips head screwdriver required
Flat head screwdriver or 3/8" nut driver required
|Hole Type||Mounts to a round hole, 2Post server rack
Provides EIA standard 3/8" square holes
|Bracket Dimensions||7" x 26.788" (178 mm x 660 mm)|
Write Your Own Review