Rack rails can be installed into racks with square, round or threaded holes. Rack mount equipment weighing up to 200 lbs (91 kgs) can be installed using rack rails. The rack rail can be installed into server racks with installation depths from 10 to 27" (254 mm to 686 mm).
Adjustable Rack Rails and Square Hole Mounting
The rail kit depth is fully adjustable from 10"-31.75" (254mm-806mm) all by loosening the screws and nuts. The rail kit is made from 18 GA steel and is zinc plated. The RackSolutions Universal rail kits are square hole to allow for the rails to be compatible with round, square or threaded hole racks.the rails to be compatible with round, square or threaded hole racks.
- Additional Information
Rail OEM Universal Fixed/Sliding Fixed Tool-less/Standard Standard Included Hardware
- (1) Left Fixed Rail
- (1) Right Fixed Rail
- (2) Rear Brackets
- Assembly Hardware Kit
- (8) 8-32 Flat Head Screws
- (8) 8-32 Keps Nuts
- (1) 10-32 Cage Nut
- (1) 12-24 Cage Nut
- (1) M6 Cage Nut
- Rack Hardware
- (8) 10-32 Pan Head Screws
- (8) 12-24 Pan Head Screws
- (8) 12-24 Cage Nuts
- (8) 12-24 Square Nuts
Assembly Notes Ships Fully Assembled Overall Installation Depth Min: 19.5" (495.3 mm)
Max: 27" (685.8 mm)
Rail Type Fixed Mounting Depth Range The Rack Rails support flange is 19 1/2" (495.3 mm) long.
The Rack Rail will support servers, computers or equipment up to 24" (609.6 mm) deep.
Finish Zinc Plated Rack Units 1U, 2U, or 3U Rack Type 4 Post Amazon ASIN 1UKIT-109-20 = B003E9N3V2 2UKIT-109-20 = B0093HG1HM 3UKIT-109-20 = B00UVKAMWU RoHS Compliant Yes Hole Type Compatible with the industry standard 3/8" square hole racks
Cage nuts included for square hole mounting
Compatible with all standard round (non-threaded) holes
Compatible with all standard threads including 10-32, 12-24, and Metric M6
TAA Compliant Yes